For each connection, you can adjust the following settings:
- Traffic Shaping Mode (Multi-User version)
- Medium/Protocol
- How do I optimally calibrate cFos / cFosSpeed?
Traffic Shaping Mode (Multi-User version)
Not cooperative
- There is a machine without cFos TS on your LAN
You use your connection with several other machines simultaneously and at least one of them has no cFos Traffic Shaping.
דיבור רשת
- Broadcast traffic statistics on your LAN
לשיפור בדיוק, שלח סטטיסטיקות עיצוב תעבורה למחשבים האחרים ברשת שלך.
Ping Variance
- אפשר גמישות לזמני פינג
אסוף סטטיסטיקות פינג להגדרת גמישות בזמני פינג; שימושי במיוחד לחיבור נייד/אלחוטי.
Medium/Protocol
- Adaptive: cFos/cFosSpeed will adapt to your connection automatically. Use this setting only if you are not sure what your connection type is. Otherwise, select the setting that applies to your connection. The better the chosen setting fits your connection type, the lower ping times should be.
-
DSL (PPPoE): Most widespread DSL protocol (commonly used in the USA, Germany, Eastern Europe, and other major markets).
PPPoE explanation @ wikipedia.org -
DSL (PPPoA/Vcmux): Common standard in Great Britain.
PPPoA explanation @ wikipedia.org -
DSL (PPPoA/LLC): Occasionally used in Great Britain
PPPoA explanation @ wikipedia.org -
DSL (PPTP): Older DSL standard still in use in some parts of France.
PPTP explanation @ wikipedia.org -
Cable: Internet via TV cable with bandwidth varying slightly according to usage and time of day.
Cable technique @ wikipedia.org -
ISDN: 8 or 16 kbytes, bidirectional, PPP in HDLC frames
ISDN explanation @ wikipedia.org -
IP over AAL5: IP data transfer via ATM
ATM Adaptation Layer @ wikipedia.org - RFC 1483/2684: DSL over ATM bridging
- Frame Count: Transfer speed varies with the number of data packets transmitted per time interval. Sometimes used in Greece.
- Mixed Raw IP/Frame Count: Downstream traffic is handled as in "Frame Count", upstream traffic as in "Cable". Used by some cable providers like ish.
Set up the right medium/protocol if you know exactly which transfer medium/protocol is used. If in doubt, use Adaptive.
How do I optimally calibrate cFos / cFosSpeed?
- Clear the traffic shaping data by clicking on "clear calibration data"
- Make a short full-speed download. (5-10 seconds)
-
Make a longer full-speed upload (30 sec - 1 min).
It is important that this upload is as fast as possible, i.e., that the server you're sending to is near and powerful (like your mail server or some fast FTP server). moreover, it is important that you have no downloads running while you do this upload. with an upstream of 256 kbit/s you need to send some 2 mbyte to the other side. - That's it. The connection is well calibrated if you have a full-blast upload and still have low ping times (both can be watched in the status window).