How to solve Internet congestion when many users share one Internet connection?

In restaurants, hostels, hotels, guest houses, on university campuses, office environments - whenever a lot of people share the same Internet connection - this Internet connection is often congested and the users experience up to several seconds of delay.

Here cFosSpeed can make a huge difference by prioritizing the traffic to and from the Internet. For example it can detect if a user uploads a bunch of photos or if some device downloads a big software update. cFosSpeed will slightly delay these big data uploads or downloads by reducing the bandwidth by about 1-2%. This reduces the ping time of the whole Internet connection, which allows highly responsive web browsing or even media streaming / VoIP phone calls and game traffic.

The effect of this setup was verified by the German computer magazine c't.
c't - magazin für computer technik, Issue 18/2018, Pages 152-155, Copyright by Heise Medien:
Windows 10 als Router mit Internet Connection Sharing

The usual state of most shared Internet connections.

This configuration will result in severe connection delays when some of the connected devices start massive up- or downloads, e.g. saving new photos or videos to cloud storage or downloading software updates. The problem can be solved by using the original router (Router A) for the Windows PC only and buying a cheap second WLAN router (WLAN Router B) for shared access.


The new configuration with cFosSpeed prioritizing the entire Internet traffic of the WLAN network.

To improve overall performance, you may want to install an additional Ethernet port on your Windows PC to connect to Router A. We always recommend to use cable connections, since they produce less latency than WiFi.


Extended configuration with cFosSpeed, second LAN connection for improved latency and an additional WLAN Router B2 to increase range.

Connecting the WLAN router

Connect the WAN port of WLAN Router B with the network port of the Windows PC

Setting up the Windows PC

1 Install cFosSpeed, following the installation instructions

2 Press the "Windows" key and type ncpa.cpl

3 Click on the resulting control panel item entry

4 Right-click on the network device you want to share. It is the one that connects the Windows PC to the Internet

5 Click on "Properties"

6 Click on "Sharing"

7 Check the upper check box to enable connection sharing. You may want to uncheck the lower box, if it isn't already

8 Click on "OK"

9 The Internet connection on this device is shared now

หมายเหตุ: Newer versions of Windows 10 have a bug which may stop Internet Connection Sharing from working after a reboot.
By using our freeware tool cFosICSyou can fix this.

Setting up the WLAN router

This particular instruction is for the ASUS RT-N12E, which we chose for its moderate price and easy setup. Nevertheless, this kind of connection sharing should work with any other WiFi access router available at your place.

1 Connect to your router using an Ethernet cable or via WiFi. The router will show up as an open network (no password required) with the SSID ASUS_60. Now enter the router IP address (192.168.1.1) in the address bar of your browser to start setup

2 Click on "Automatic Setting"

3 Enter a Router Login Name and the New Password

4 Click on "Next"

5 Enter a new SSID (e.g. GuestWiFi) and a WiFi password

6 Click on "Apply"

7 The route will now display a screen showing the new WiFi configuration. You may want to write this down, because it will be needed to connect with the router from now on

8 After reconnecting with the newly configured WiFi network, the router will show a page listing its current setup and connection status