Stáhnout
Důležité poznámky k cFos Traffic Shaping
cFos Traffic Shaping is now in calibration and learning phase. This is necessary to determine exact connection speed and performance so as to ensure optimal download and upload rates will be attained while the ping remains low.
Depending on how much you use your connection, this phase can last for a few days. However, you can speed up this process by sending yourself a big file by e-mail, thereby effectively running an upload for several minutes at full bandwidth.
Ping times should start out low from the get-go, while the upload rate will first have to be properly aligned with a connection's maximum specifications. You can switch between having your current ping time displayed either numerically or graphically on the status window.
Poznámka: To measure the latency Pings will be sent to www.cfos.de. However they never reach their destination, since they use only a small hop count (typically TTL 2 or 3). If you prefer another ping destination, you can set the key ping_dest in the file cfosspeed.ini, section [param].
Additional things you can do
Disable other products that try to limit the connection speed, e.g. the Traffic Shaping of the Fritz!Box. These two solutions will interfere with each other.
In the context menu, select the correct medium for your connection under Options/Settings/Traffic Shaping. 
Více informací
If you're frequently using phones plugged into the router for making Voice-over-IP (VoIP) calls, please select "variable bandwidth" for your connection.
Více informací
