cFosSpeed is the official Internet Accelerator for ASUS, GIGABYTE, ASRock and MSI gaming products

Get a free license (cFosSpeed) for helping us with 10 or more reviews.
Some texts are generated by machine translation. Help us to improve these texts. Click the button to start revision mode.

Enable port forwarding for the Wolflink HC5661-Wolflink

Wolflink HC5661-Wolflink Step 1

1 Log into wolflink router with your password (default IP: or you can use http address: Default password: admin)

Wolflink HC5661-Wolflink Step 2

2 Click on "Advanced settings" at the start router page

Wolflink HC5661-Wolflink Step 3

3 Choose "LAN DHCP Service" to setup statical IP address for your computer or skip to step 6 if you have it already

Wolflink HC5661-Wolflink Step 4

4 There are a list of connected clients. Find your computer

Wolflink HC5661-Wolflink Step 5

5 Copy your computer IP and MAC addresses into corresponding fields and press "Save" at bottom (Now your computer will have a statical IP address)

Wolflink HC5661-Wolflink Steps 6-7

6 Choose "Port forwarding"

7 Click on "Add port forwarding rule"

Wolflink HC5661-Wolflink Step 8

8 Fill the fields:
"Name" - any name you would like for this rule
"Protocol" - (TCP or UDP) for webserver choose TCP
"External port" - router port which will be accept connections from Internet (80 for webserver)
"Internal IP address" - statical IP address your computer with webserver (you can set or check it at step 3)
"Internal port" - your computer webserver port (80)
Press "Save"

Port forwarding is now configured for your computer!

Enable port forwarding for the Wolflink HC5661-WolflinkInstructions on the activation of Port Forwarding for the Wolflink HC5661-Wolflink